Premium Men's Blazers & Formal Wear Mannargudi, Tamil Nadu · Online across India

Men's Blazers Blazer Types

Blazer Lapel Types: Notch, Peak and Shawl

Notch is the everyday default, peak raises formality and broadens the shoulder line, and shawl belongs to evening wear only.


5 min read Published Guide

The lapel is the first thing anyone looks at on a jacket, because it frames your face and points at it. There are three shapes, they carry different formality, and they are decided at the pattern stage — so unlike a sleeve or a hem, this one cannot be changed later.

The three shapes

Notch. The lower edge of the collar and the upper edge of the lapel meet at a step, forming a notch. It is the default, and it is appropriate everywhere from an office to a wedding reception.

Peak. The lapel points angle upward past the notch, toward the shoulder. More formal than notch, and standard on double-breasted jackets. The upward angle carries the eye outward and up, which visually broadens the shoulders.

Shawl. A single continuous curve with no notch at all. Evening wear only — dinner jackets and formal evening blazers. On a daytime jacket it reads as a costume.

The three lapels
Criterion Formality Visual effect Where it belongs
Notch StandardNeutralEverywhere — offices, meetings, weddings
Peak HigherBroadens the shoulder, lifts the eyeDouble-breasted jackets, formal suits, receptions
Shawl Evening onlySoftens and roundsDinner jackets, formal evening wear

Width, and why it matters more than shape

Lapel width is the variable that dates a jacket, and the one that should be matched to you rather than to a trend.

The principle: the lapel should be roughly proportional to your chest width and to the width of your shoulders. A broad frame carries a wider lapel; a narrow frame is overwhelmed by one.

A useful rough guide is that the lapel should reach about halfway between the collar and the shoulder seam. Much narrower and the jacket looks insubstantial; much wider and it looks theatrical.

There is a second reason to avoid extremes: very narrow and very wide lapels both date sharply, while a moderate lapel looks correct across decades. If you are having a jacket made and expect to wear it for years, moderate is the answer.

Reading a lapel
  1. Gorge — Where collar meets lapel. A higher gorge lengthens the torso.
  2. Lapel width — Around halfway between collar and shoulder seam.
  3. Button point — Where the lapel V ends. Lower means a longer V.
  4. Lapel roll — Should curve softly, not press flat.
Width, gorge height and button point together decide how the lapel frames you.

The gorge line

The gorge is the seam where the collar joins the lapel. Its height is a subtle variable with a real effect: a higher gorge lifts the visual weight of the jacket upward and lengthens the torso; a lower one does the opposite.

It is also one of the clearer signals of when a jacket was made. Very low gorges look distinctly dated; very high ones look aggressively contemporary. Somewhere in the middle survives longest.

The lapel roll

Not a type, but the quality signal most worth learning to see.

On a well-made jacket, the lapel does not fold along a hard crease. It rolls in a soft, three-dimensional curve from the gorge down to the button. That roll is created by the canvas inside the chest and by careful pressing, and it is one of the clearest visible differences between a canvassed jacket and a fused one.

Look at it from the side. A soft curve means structure underneath. A flat, pressed fold usually means fusing — glue rather than canvas — and that fold will eventually bubble.

Choosing for your build and occasion

  • Narrow frame. Moderate to slightly narrower lapel; a peak lapel adds welcome shoulder width.
  • Broad frame. Moderate to slightly wider lapel. A very narrow lapel on broad shoulders looks undersized.
  • Shorter build. A higher gorge and a lower button point together lengthen the torso.
  • A first blazer. Notch, moderate width. It is the only configuration appropriate at every occasion.
  • A groom’s reception jacket. Peak lapels photograph well under stage lighting — the angled line gives the frame something to read.

Lapel mistakes

  1. Choosing a very narrow or very wide lapel

    Both date sharply, and a jacket is a multi-year purchase. Extremes also fight with your actual proportions.

    Fix Moderate width, scaled to your shoulders.

  2. A shawl lapel on a daytime jacket

    Shawl lapels belong to evening wear. In daylight, on a business jacket, they read as fancy dress.

    Fix Notch for daytime, peak if you want more formality.

  3. Pressing the lapel flat

    The soft roll is created deliberately and takes skill to build. Ironing it flat destroys it, and it does not come back easily.

    Fix Press around the roll, never across it. Ask a tailor rather than doing it at home.

  4. Assuming the lapel can be narrowed later

    Lapel width is set by the pattern and the canvas. Changing it means rebuilding the front of the jacket.

    Fix Decide before it is cut. This is a buying decision, not an alteration.

The Radha perspective

Lapel width is one of the few decisions in a custom order where we will actively push back on a request, because it is the detail most likely to date a jacket the customer intends to keep for years. When someone asks for something very narrow, we usually make it a little wider than requested and explain why.

The lapel roll is the other thing we spend disproportionate time on. It is invisible in a photograph and it is the first thing anyone with an eye for tailoring looks at.

Next step

Look at the side profile of your blazer’s lapel. If it folds flat rather than curving, you now know something about how the jacket was built — and what to check on the next one.

Comparing blazers before you commit? Explore Radha custom blazers